Hobby, Needlework
Pattern for hats with knitting needles. Knitting with needles: patterns for children's hats
The caps are knitting pretty fast and require a bit of yarn. However, for beginners, some stages of work can be difficult.
Finding the pattern for the hats with knitting needles is quite simple, it is much more difficult to correctly perform the cutting of loops on the vertex. At too sharp decrease, the cap goes shallow. If you cut less loops than required, the shape of the headdress will be elongated.
Well, when designers develop schemes that take into account all the nuances and allow you to quickly and easily connect the headgear. After reading the article, you can choose a suitable pattern for the hats with knitting needles. A few are presented, some of them are so simple that they make it easy to calculate the reduction, others have already laid down the principle of loops.
Pattern "Spit" for the hats with knitting needles
Some of the most beautiful and at the same time rather complicated patterns are the braids (they are also called arans and bundles). The essence of the ornament is that a number of loops are exchanged with neighboring loops, and then knotted. Very large and attractive paintings are produced.
The above picture shows a children's cap with universal braids. They are great for decorating hats for boys and girls. In addition, you can increase the number of rapports to make a product for an adult.
However, it takes some experience to use this beautiful pattern for the hat with knitting needles.
Knitting hats with braids
Traditionally for the design of the lower edge of the caps apply different types of rubber bands. In this case, the developers took care of knitters and offered them a rubber band, from which it will then be easy to go to the main pattern.
Repeats of gum and ornament with braids are the same - they make up 16 loops (P). Therefore, you need to calculate the control pattern, how many rapports will be in the canvas and start working:
- Type the required number of loops.
- Abrasive according to the scheme A.1 canvas to a height of not less than five centimeters.
- Go to the scheme A.2. If the work is done with thick yarn, one rapport is enough. Depending on how long a hat is needed, the ornament should be repeated one or two more times.
- Complete the knitting caps followed by A.3. The remaining loops are gathered on a strong thread and tightened into a ring.
- At the last stage you should sew a hat and hide the tails of the threads.
Steam does not need to steam or iron, as they can lose shape, become too soft and thin.
Pattern for a hat for a girl with knitting needles: a jacquard is always in fashion
The next model looks always appropriate and relevant, jacquard ornaments do not go out of fashion and suit absolutely everything. To create this headdress, you need to prepare a material of six shades (one for the background and five for additional colors).
The order of knitting hats:
- Run a control sample, calculate how many loops are 10 cm and type the required number for the first row.
- To gum on height from five up to seven centimeters. Here you can apply absolutely any familiar eminent gum. A classic 1: 1, 2: 2 (it is used by the designer who designed the model) or a large English one is suitable.
- When the elastic band is finished, it's time to move on to the main pattern.
- At the last stage, cuts are made in the twelve places of the row.
The neat side is a sign of a quality product
The secret of a neat jacquard is the correct handling of non-working threads. If you just leave them on the wrong side, long broaches are formed. When you wear the product, they are stretched, torn and lead to deformation of the ornament.
Experienced craftsmen twist the non-working thread from the working thread every three to five loops, and then continue to use the working thread. Consider an example of knitting a row, in which there are ten loops of light beige thread (No. 1) and one of dark beige (No. 2). It is necessary to tie the first three loops of yarn No. 1, then to translate No. 1 to No. 2 and to knit the following three strands No. 1. After that, weave again and knit the last four threads No. 1. Picking up the non-working thread, we must carefully follow the tension: too weak will lead To the fact that the non-working thread will be visible through the Jacquard ornament. However, too tightening the fabric is also not recommended, since it is obtained unevenly.
How to Cut Loops on the Top of the Head
Such a pattern for the hats with knitting needles is difficult to cut, so the diagram shows an even section of the canvas. The ornament allows to decorate the main part of the headdress, and the cuts of the loops on the crown are performed as follows:
- Mark the markers with six loops in a row.
- In each facial row, one loop is reduced one and two before and after the marked ones. Thus, the number of loops decreases by 12 pieces. Visually, the canvas is divided into six wedges.
- The last 20-25 is collected on a strong thread and pulled into a ring.
After stitching, the hat is ready.
Simple hat for beginners
The photo below shows the simplest model of caps that you can think of.
This headpiece is a rectangle, strapped on the vertex with a strong thread.
Description of work:
- According to the pre-test pattern, calculate the number of loops for the first row.
- Type the number of elements on the spokes.
- To paint according to the scheme, which is in the lower left corner of the photo, the canvas to a height of 10 cm. In this pattern there is the same set of elements as an elastic band 1: 1. Only these loops are knitted with a shift: the first row starts with the facial P, the second (with the back row) also with the front one, the third (the front row) with the purl P and the fourth (purl) with the purl P. Thus, this pattern for the hat with the children's knitting needles Repeated through every four rows. The rapport includes only two loops.
- When the pattern is finished, you should switch to stocking.
The prepared cap is pulled together and sewed.
For children's products should be selected material that contains a maximum of natural fibers, but it does not prick. Optimal composition: 100% merino wool. If there is a suspicion that the headdress will be hot, you can use the merino with cotton or bamboo. Do not buy yarn with acrylic, as this synthetic material does not warm at all, but it helps strengthen sweating.
It should be noted that almost any pattern for the hats with knitting needles will look great, being tied from tightly twisted thread.
Similar articles
Trending Now