Optional cooling for laptop: overview, types, specifications and reviews

Owners of stationary PCs often complain that the video card is very hot, a very hot processor, and the cooler does not cope with all the tasks. Many begin to look for the ideal cooling system. Someone prefers to buy a new, but more powerful cooler, someone decides to switch to nitrogen cooling, and someone is experimenting with the water system. Anyway, the choice of the PC owner is great. But the additional cooling for the laptop is much harder to find.

For whom?

In general, to think about how to "cool down" the heat of your laptop, you need to immediately when buying a device. Sometimes it's too late to solve a similar problem when the processor burns on the integrated board or the whole system fails. Therefore, in order to understand whether additional SD is needed, you need to determine the purpose of your device.

If you purchased a simple laptop that you will use for surfing the Internet and sitting in office programs, then, most likely, you will never feel any problems with overheating. If you decide to purchase a gaming device or a serious device for multimedia, then immediately you need to think about the ambulance.

Exceptions

But you do not always need an additional cooling system for the laptop, if you have a powerful device. Often, manufacturers place emphasis on this system, create special technologies, and all you need is to periodically clean the inside of the laptop. Also, everything can depend on the constructive component, because developers are always trying to make a high-quality and productive system.

Time to think

What to do if you did not immediately think about buying a JI, and hoped for a manufacturer, but he, oddly enough, failed you? Here you have to think about diagnosis. Causes, in order to buy additional cooling for the laptop, there may be a lot. First, you realized that before you - a powerful system that gives off too much heat, which means you need to help her cope with overheating. Secondly, you decided that it's worth trying to improve performance, and engaged in overclocking. To make it happen safely for the device, it is advisable to immediately acquire a CO and experiment.

It happens that the user starts to notice how the system becomes stalled. He immediately sins on the operating system, which could pick up viruses, and reinstalls it. When the situation remains the same, he begins to think that one of the components has failed. So start to appear grief-users who are looking, as if in an integrated system to put a new processor or change RAM.

But many forget about the prevention and diagnosis of the device. You can not just buy a laptop and forget about it forever. Over time, he asks for care. This can happen in a year after the purchase, and can happen in 5 years. But the user must understand that the system needs cleanliness. If you do not know how to independently disassemble your device, clean the cooler, radiator, change the thermal grease, then bring it to the service center.

If you are not sure what the problem is in the cooling system, try using the utility to monitor the temperature. Do the testing, and when the system tells you that the JI is not quite coping with its tasks, then go to clearing the board and all components from dust.

Manufacturer's advice

Few of us have read the instructions for using a smartphone, tablet or laptop. Probably, no one knows that there are warnings in the user's manual, ignoring which, you can destroy the device before the due time. So, for example, there is information that you can not use laptop on a soft surface, work with it on your lap, prevent air from venting, etc.

It is also important to understand that any device is short-lived, especially under current competition and marketing, manufacturers are not profitable to make devices that would live and delight the user for decades. It is much easier to produce a ton of new models each year, which differ in the color and arrangement of the buttons, so that customers change their laptops due to outdated configurations and the fact that they are worn out.

As a result, there are real long-livers - devices that have been working for more than 10 years, they are not very relevant now, but they still perform standard functions. There are also such devices, which after five years are noticeably "tired". Including wear and cooling system. Therefore, if you began to notice overheating, and your laptop a hundred years in the afternoon, then it is worth thinking about buying a new one.

Danger

Why do we need coolers for laptops, additional cooling, different methods of ventilation? It is clear that the system does not overheat. But what happens to it when it operates at elevated temperature? First of all, hot air reaches not only all the elements on the board, but even affects the keyboard and touchpad. When the load is high and the temperature exceeds the boundary values, the CO strongly rises, which is a discomfort for the user.

Options

In addition to the fact that it is possible to do additional cooling for the laptop with your own hands, there are also better options to improve the CO. Thus, it is easy to find air cooling in the form of a stand on the market. This is the most common way to protect the system. It is possible to install a vacuum cooler, which has recently been popular among those who are dissatisfied with the stands.

Decision

Before considering options for which you only need money, we learn about the creative alternative. It's about homemade device. In general, the Internet has a huge number of examples and answers to the question of how to make extra cooling for the laptop. Not all of them, of course, are reliable and qualitative, but there are already more or less standardized options that have been used by more than a dozen people.

So, the essence of this experiment is that the self-made system does not cool the case, but helps to remove warm air from the radiator. For this, in addition to the internal cooler, an external cooler is installed. There are many options for its design, as well as materials. If you decide to create such a miracle, it is better that the ventilation grill come out backwards, since on the side such a design can interfere. Well, you have to reconcile with the static of the device.

The body is made of cardboard or whatever comes to your mind. A regular fan is bought on average 120 mm in size. The cooler should be designed for a system unit. But of course, it will be used in homemade construction. Therefore, it should work at 12 watts. For this additional cooling, the notebook PC will not work. To power the fan, it will be enough to connect it via USB or to buy it a simple 12 W power supply. We make a pyramidal design, which will narrow to the edge: on the one hand we have a built-in fan, and on the other there is a slot the size of the vent. It must fit snugly against the hole, so that there is no air leakage, and the structure is sealed.

Experiments

Of course, the above option is not dangerous, but all such experiments can lead to the irreparable, especially if you do not have enough information. In general, there are many similar methods. Another option is to do additional cooling for the laptop instead of the DVD drive. Some users understand that in the era of flash drives and other information carriers, the optical drive is losing popularity and occupies an extra place in the laptop. They begin to think that you can install it instead.

So thoughts lead to the installation of an additional hard disk or, depending on the design, the fan. The last option is more suitable for people who understand this topic, because you need to understand where in this case the air will come out and where to go.

Official devices

As mentioned earlier, one of the devices that can serve as additional cooling for the laptop is a stand. This is the most popular method that not everyone likes. Nevertheless, it is believed that to knock down the heating temperature, you need to raise the note above the surface. To do this, users put pencils, books, coasters and stuff. Using a similar principle, manufacturers have developed stands with built-in coolers. Differences between each other in terms of the size of the fans, their number, the location of the stand, its dimensions, etc.

Another additional cooling for the laptop is the vacuum cooler. This is an option for those who are negative about the stands. This device is "sucked" to the grille. It has the form of a box on which there is a temperature indicator. It works like a homemade device, but more efficiently and automatically. It takes a large volume of air, quickly sucks and cools. Compact and convenient. The only drawback is the noisy work.

Conclusion

As practice shows, additional cooling requires only in case of powerful systems. This option is suitable for gamers, since there devices are heated to crazy temperatures. Although in such devaysa usually SO tuned much better than in the same ultrabook. Also, the owners of obsolete devices think about the additional cooler, which can not part with their laptops. Because the system wears out and loses its initial performance, it needs additional help.

But the most important thing you can not forget is the prevention and cleaning of the laptop. This is the reason for the overheating and burning of the board, which occurs most often and can ruin the device in a couple of years after the purchase.