How to crack a lock. How to hack a padlock if you lose your keys

Many were in a situation when you need to get into the apartment, but there is no key to it. And, of course, very few people know how to hack the castle, and what is needed for this. On TV often show similar machinations. It seems to us that all this is very difficult. However, experts who own this secret, convince that it is within the power of everyone. The main thing is to know which tool to use.

What you need in order to open the door without a key

Of course, only a thief or an expert in emergency opening knows how to crack a door lock. For this you will need not only special pintles, but also certain skills. Special handbooks on this subject have already been issued today. Such materials are widely distributed on the Internet. Therefore, the practical skills to acquire is not so difficult. It's only three months of serious training - and any person will absolutely master how to crack the lock on the door. There are situations where there is no need to make any effort to open the door. Just need to buy special equipment. It should be noted that the tools are quite cheap, they are affordable for many people.

Open padlock

All locks are classified by type of installation. They can be overhead, embedded and hinged. First, we'll figure out how to crack a padlock. This barrier is considered one of the most accessible. No tools are needed for this. Suffice it to apply serious physical strength. You can also take a crowbar or a crowbar. A couple of punches - and the road is open. But the disadvantage of this method is that you can seriously frighten the neighbors. If you act silently, you will need a special picklock and a few seconds of free time.

Overhead and Mortise Locks

Such a barrier requires much more time and effort. Suvaldnye locks are considered to be one of the most resistant, since they have a large number of locking pins. But they too can be opened quickly enough. One of the most reliable is the cylinder and rack. However, experts are absolutely sure that there is no difference in the form of the product. Any of them can be opened for 15 minutes. Many thieves know very well how to crack a lock with a secret. For these purposes, you will need a special device and perfectly honed skill. Then no barrier will be a problem.

Cylinder locks

Such products are capable of providing a very high level of safety. Their accuracy is very high, the five-pin design has about a million combinations. Although such locks produce a large number of different firms, they all have key wells of various shapes. So do not worry that your door can be opened with a foreign key. Recognize such a lock is easy enough. You can just look into the key well. Inside it is a round pin. It happens that you can see the boundary between the upper and lower pins. It comes out on one line with the wall of the cylinder itself. Those who do not know how to learn to break locks of this type, it is necessary to master the instrument well.

A hand with a master key should feel that the tension has eased, holding on to a certain pin. And that hand, in which the rotator is located, should feel that the pair began to yield, to leave on the line of separation. In all this procedure it is very important that both hands feel how the elements inside the lock rotate. Those who are well mastered, it will be easy to cope with the task without a key.

Hacking pin lock step by step

For such an operation, you need a master key. It must be carefully inserted into the hole crochet upwards. But this is only if the lock is installed correctly, and not vice versa, as it often happens. To make sure of this finally, simply look into the keyhole and find the most recent pin. After this, you can continue the operation. The standard model has five pins. Prior to the first, as a rule, the distance does not exceed 1 inch.

Before you break open the lock, you need to pay attention to the fact that there is not a strong pressure on the rotator. Otherwise, the front pins will stop moving. After the back pair is groped, you need to carefully pry the pin, and then release it, but leave the master key at the last. After that, you can enter the rotator. But do not forget that there is room for a master key.

Now you can move clockwise, but they should be pretty smooth. Next, gently pry the rear pin. If everything is done correctly, you can hear a characteristic click. A pair of pins will not be as elastic as before. But do not make a lot of effort. If you continue to move further with a master key, then a link may occur, because the line of separation will be traversed. Just need to rotate the rotator evenly, without pressing it.

A few important points

The fourth pair of pins will be next, so it's quite easy to find it. Before hacking such a lock, you just need to lift the pin until it begins to give way. In this case, the force on the rotator should be applied. After he starts to go to the line of separation, you can feel it, and also hear certain clicks. With the third element everything is the same. The main thing is to perform uniform translational movements. For analogy, we can bring the process of twisting the lid on a jar of mayonnaise. Here clicks can not only be heard, but also felt.

Why does the operation depend?

After the last pair of pins succumb, the cylinder starts to rotate completely freely, and the door will be opened. But some just do not know how to crack the lock, and face some problems. That pin is very high, then the rotator does not lend itself. Just do not need to put too much pressure on it, the pin will then lower itself, and the cylinder will open. A large number of hacking is done quite successfully in this way. If all methods are tried, and the door is still closed, you need to start over. Perhaps somewhere there was a mistake.

Invisible Castle

Of course, the well is considered the most vulnerable place. And many professionals are convinced that having certain skills and knowledge, it is easy to understand how to crack a lock with a clip, master key or other tool. All this works in the event that there is a core. But some castles have certain nuances. They simply do not have a keyhole. Such products are unique. They are also called invisibles, because they do not have that vulnerable place that is being hacked.

In order to open a similar door, you do not even need a key. It is enough to have a proxy card or a special remote keychain. Such locks are characterized by a high level of security, and many experts recommend installing them. In this situation, the perpetrator will be at an impasse. He may have a variety of tools for hacking, but only a keyhole can tell where to apply efforts to strong steel pins to saw. That's why he got the name "invisible". There are bolts in it, the mechanism itself is mounted on the door, and it's hard to imagine how to break a lock. You can not look anywhere, you can not see anything anywhere. And not only outside, but also inside. That's why the traditional ways of eliminating obstacles here do not work at all. We need to look for an alternative. And completely to demolish a door or to punch a hole in a wall hardly to whom it will want. Yes, and this is not a way out of the situation ... But if there is such a device, then most likely, soon enough, there will be a mechanism for hacking it.

And finally ...

In this article, we described in detail how to hack a padlock, mortise, waybill and pin. In fact, you need special equipment and certain knowledge. There are some subtleties that you need to know for each specific species, but it is quite obvious that any product is easy to open. No levels of secrecy will not be an obstacle in the way of professionals. Many owners of steel doors are absolutely sure that they have nothing to fear, because their locks are tightly embedded in the canvas. In fact, for this operation, only a quarter of an hour is enough - and the barrier will be eliminated. And gives out any model keyhole. She can not hide any secret. Hope remains on the locks, "invisible", but this is only for the time being ...