GUR fluid replacement, "Ford Focus 2": features, step-by-step instructions and recommendations

New cars are improving day by day and becoming more comfortable. Manufacturers invest huge sums to satisfy all the needs of the future owner. A significant disadvantage of all modern cars is the complexity of their maintenance. This process requires investment of funds and time. But it is possible to save considerably if you carry out maintenance of the machine yourself, having a little experience and a set of tools.

What is GUR fluid?

The fluid for the hydraulic power steering is a special synthetic oil, which ensures stable operation of the unit. It protects the node from various damages. The peculiarity of this oil is that it can perform its direct functions in a large temperature range - from -40 ° C to + 120 ° C.

Why change the liquid

The replacement of the fluid by the Ford Focus 2 turbojet is necessary for the reliable and efficient operation of the power steering in this car. Many do not change this oil, because manufacturers do not regulate such substitutions. However, experienced experts still recommend periodically changing working fluids. This is recommended approximately once every 2-3 years. It is also possible to change the GRU oil every 100 thousand km of the car.

On how much high-quality liquid is poured into the unit, the work of the GUR depends, and this will ensure comfort and safety in the process of driving. After all, if the oil is heavily polluted, then the pressure in the system drops and the amount of force necessary for turning the steering wheel increases. And this, in turn, leads to increased wear of the mechanism of the hydraulic amplifier and, as a result, to expensive repairs.

To avoid this, it is necessary to monitor the oil level. Regular replacement of the fluid by the Ford Focus 2 turbojet is a guarantee of the correct operation of the unit. The pump of the amplifier in this case will last long and qualitatively.

When to change?

It is easy to determine when a replacement of the GUR fluid "Ford Focus 2" is needed. Restyling it or an old body, it does not matter. First of all, pay attention to what level of liquid in the tank. Capacity can be found to the right of the engine.

Next, look at the quality of the oil itself. It should not be dirty. The first signs that the liquid is already unfit is its color and the distinct smell of burning. And to determine the quality, apply a few drops from the tank on a regular paper napkin. So you can easily assess the condition of the oil.

Which oil is suitable for the Ford Focus 2

The replacement of the fluid by the Ford Focus 2 turbine must be carried out in strict compliance with all technologies:

1. Experts recommend using the Ford WSA / M2C195 / A or Revanol-PSF. It is allowed to fill in other liquids, however, there are certain risks. It is necessary that the composition of the liquid and the characteristics meet the requirements of the manufacturer.
2. GUR fluid in Ford cars can be green, or red.
3. Mix the oil of different manufacturers (of different colors) is not worth it. And to determine the color, you need to drop the product onto a paper napkin.
4. Along with the original, in the modern market are offered and other, more budgetary, but with enough quality oils from well-known brands. This is the red Motocraft Merson LV XT10QLVC and the green SWAG 06161.
5. A full replacement of the fluid from the Ford Focus 2 turbojet (1.6 and 1.8 models, including) will require 2 liters of oil. At partial replacement fill 700-800 ml. Specifically for the second generation model, the manufacturer recommends a green liquid.

Features of the level check

Often the oil for the hydraulic booster, according to the manufacturers, is designed for the entire life of the car. However, despite these assurances, everything is a little different. Sometimes with a hydraulic amplifier there are various malfunctions, after repair of which the replacement of the GUR fluid is required. In the "Ford Focus", as we have already said, it is produced every 100 thousand kilometers.

It is also necessary to regularly check the level of this liquid in the reservoir. They are made in the process of each scheduled maintenance. The system may leak, the color of the liquid may change, and the pump itself - buzz. All these are signs that it is necessary to check the condition of the oil for the hydraulic booster. It may be necessary to replace the GUR fluid for Ford Focus 2 and 1.

How to determine the leakage of oil GUR?

Leaks in the system are, unfortunately, not uncommon:

• To find the place of the rush, it is necessary to muffle the motor and wait until it cools down.
• Then it is required to wipe all the details related to the GUR system until they are completely dry.
• Next, check the oil level in the reservoir GUR. If necessary, add oil to the level.
• Then, once again start the engine and rotate the rudder until it stops on each side.
• Now you can easily determine where the leak is.
• Filling and replacing the fluid of the Ford Focus 2 turbojet should only be carried out with the recommended liquids or the one that is filled in the tank.

It is not necessary to mix. It must be remembered that any level of fluid testing is best performed on the most flat surface. On the tank GUR there are special marks, showing the minimum and maximum level. When the engine is not running, the amount of oil should be within the normal range. If the motor is running, then the liquid level can reach a maximum. If this does not happen, and the oil goes to a minimum, you should top up a couple of milliliters.

The replacement process

As already noted, in cars "Ford Focus" of the second generation only green liquid should be used. Before you perform a replacement, you need to find the right oil. The process of replacement is not complicated, and even beginners will cope with it. But it's better, if someone helps in this business, this will make the operation even easier.

The tank is connected to the system by two hoses. One of them goes to the pump, the other goes back to the tank. In order to replace the oil from the GUR with the Ford Focus, it is necessary to prepare the hose in advance. Its length should be no less than one meter. The diameter corresponds to the size of the return hose. At one end there must be a choke. Additionally, you may need a similar size pipe. But there must be a stub at the second end.

The process looks like this:

1. Take a container with wide edges. Its volume should be up to 3 liters.
2. The open part of the hose is lowered into it.
3. Then remove the reservoir of the hydraulic booster and unscrew the fixing screws.
4. Next, the clamps on the return hose, which is fixed to the tank, are dismantled with pliers.
5. Then the element is removed from the tank. It installs the fitting from a pre-prepared hose, and its second place is prepared for the second prepared one. He has a stub at the end.
6. Then unscrew the lid from the tank and fill in a new liquid.

Replacement Features

It is more convenient to work together. One will fill the liquid, the other will drive the car engine. And yet - you need to constantly monitor the color of the oil that the pump pumps from the expansion tank.

If a new liquid flows (and it will be different from the old one, not only in color, but also in smell), then the motor can be stopped. It is very important that no air gets into the system during the replacement process.

Conclusion

As can be seen, the replacement of the GUR fluid "Ford Focus 2" (1.8 and 1.6 models here, too, can be attributed) - this is really not the most difficult process among others, which are necessary to maintain the car in proper condition. The main thing - to choose the right new oil and constantly monitor its level in the tank.