Prefabricated hangar: advantages, types and features of installation

The prefabricated hangar today is a very popular building. And it is designed not only in areas with severe climatic conditions, but also in other natural areas. The fact is that such facilities have a lot of undeniable advantages. What is the product and how it is built, you will learn further.

What is the design?

So, a prefabricated hangar is a special economic structure that is used for domestic or industrial needs. That is, you can store in it any food supplies, paint and varnish products, tools. They are also intended for different types of vehicles. That is, prefabricated hangars, photos you can see in the article, have a very wide range of applications.

Before the construction of such a structure begins, it is necessary to carefully design it. Naturally, this should take into account not only the purpose of the product, but also the features, as well as the conditions of its installation (the surface of the ground). For example, it can be additionally insulated, covered with any materials. In any case, the main structural part of the hangar is the frame, which is usually made of metal.

Product Advantages

Among its main advantages are:

- Reduction of construction time.

- Sufficient stability and strength of the structure.

- The relatively low cost of building materials. In addition, the frame can be made by your own hand, provided that the necessary tools are available.

- Quickly built hangar has a small mass, which allows you to install it on weak ground.

- There is no dependence on climatic conditions.

- A wide range of different options for projects and forms of the finished structure.

- Ability to obtain different design solutions.

- Ease of maintenance.

- Durability (not less than 50 years).

Disadvantages of construction

Now we should consider what are the disadvantages of such a hangar:

1. Limitations on dimensions. The fact is that the height of the product can not be arbitrary. In most cases, it depends on its width.

2. After dismantling, it is almost impossible to restore such a structure. You will have to build a new shelter.

3. Arched constructions do not allow full use of their volume.

In principle, these shortcomings are not significant. Everything depends on what the structure will be used for.

Hangar Classification

You can divide the provided facilities in this way:

1. By design:

- Straight-walled. This is the simplest option. Thanks to this form, you can build several floors in the hangar. In addition, it uses almost the entire volume of the room.

- Arched. The advantage of this type of product is economical and quick installation.

- Frameless. They can be mounted in any conditions. The fact is that for their erection there is no need to build a deep foundation. Most often, such products are installed to store agricultural products.

- Awning. They are a dismountable structure made of metal. All parts are bolted. Most often, you can observe such types of buildings in the markets (shopping pavilions), sports grounds.

2. By material of the structure:

- Prefabricated hangar made of ferrous metal. Its feature is the need for anti-corrosion treatment. It is best to use such a frame in the event that the structure must withstand heavy loads or will consist of several floors.

- Constructions from the galvanized profile (cold-bent). This material is considered very light and relatively cheap.

- Construction of combined materials. This option is the most acceptable.

Mounting Features

Installation of prefabricated hangars has certain nuances that should be observed:

1. Some types of products must be insulated, for example, facilities for storing plant products, animals and feed for them. For this purpose, polyurethane foam, mineral wool or sandwich panels can be used.

2. Before the beginning of construction it is necessary to build a foundation. It does not have to be very deep, since the hangar has a small weight. Next, the frame is assembled. Welding can be used to bond it. Bolt fixation of elements is more often used. After the frame has been installed, it is covered with rolled metal. From it, panels of the established size are made. To join the sheets, special rollers are used, which ensure the strength and tightness of the joints.

3. The construction of prefabricated hangars may involve the presence of internal walls or partitions. If you need this particular building, then you can give preference to multi-span constructions. They can be purchased in ready-made form.

As you can see, the presented constructions are constructed very quickly and without special difficulties. That's all, good luck!