How to Make Transformer Paper - Step by Step Instructions

Paper is, perhaps, one of the most versatile materials. You can make a lot of it out of it. Paper is used in industry and in technology, but now everyone knows about the possibility of making some kind of crafts from it. Surely, many of you have heard of origami, or at least made airplanes in school from a copy of a sheet at a break. Also from paper, you can create models of weapons, cars and military equipment, or even transformers.

In this article, we will talk about how to make the paper transformer yourself. Agree that such non-standard crafts can distract you from the routine, make the rest more interesting and entertaining. In Runet, there are many websites that tell you how to make various simple origami from paper, how to make a car out of paper, how to make a transformer, and other similar crafts. On YouTube and other similar sites there are dozens of videos on similar topics. But, if you are reading this article, then such simple things are hardly interesting to you, are they? So, perhaps, it is worth moving on to the most important thing.

Materials that you need when creating a transformer, very little. Before you make a transformer paper, it is enough to have at your disposal:

1) thick paper or cardboard,

2) scissors,

3) Scotch tape.

So, below is described the procedure itself, how to make of the paper transformer:

First you need to take a sheet of cardboard, a length equal to 24 centimeters, and a width of 12. We delineate the sheet into three columns: the first, the width, should be equal to 5 centimeters, the second - 4 centimeters, and the third, respectively 3. Then the same The sheet should be drawn with transverse lines, so that you get eight bands horizontally.

As a result, in each column there should be eight rectangles with a height of three centimeters. Happened? Great, then we'll have to work with scissors. It is necessary to cut the sheet along horizontal lines, as if on strips. After that, there should be eight bands, and three rectangles in each of them.

Then you will need to bend each strip along vertical lines, after which each segment should look like the letter "P". Now you will need to use an adhesive tape. Connect the edges of one of the shapes so that it looks like a triangle, and, with the help of an adhesive tape, fix the angle obtained. By the same mechanism, you should join the edges of the remaining seven strips, and glue together with adhesive tape. After that, you should get eight volumetric triangular modules.

After this, you need to take two "triangles", carefully folding them so that they are stacked on top of each other, and then glue them with adhesive tape, putting its strip on one of the sides of the module. In the end, you will have a dual module.

The above operation should be repeated for the other "triangles", resulting in four double modules, and continue to work with them. Then - using Scotch tape, glue the double modules for two more, after which you should get two modules of 4 "triangles" in each.

Now, on one of the sides, in the place where the lower and upper parts of the modules are connected, gently glue one small piece of tape. After that, you will get two fairly flexible modules. And now you need to put them close to each other, so that there are squares on the top, with a side of three centimeters for each, and below - the faces that will form the corner. After that, you need to paste one more piece of scotch between two squares, located at the top.

Well, that's all, now you know how to make a transformer paper and your artwork is ready. Check the reliability of connecting the modules to each other, and if the connections are sufficiently reliable, enjoy the work, the creation of which you have diversified your free time. Good luck!